EKOM AD2250, Руководство пользователя

Страница: 30 / 92

OPERATION
NP_AD500-2250-1_01_2020 -30- 01/2020
“RUN MODE” screen

TOTAL HRS
– total time the dryer has been
switched on

RUN HRS - total dryer operating (cycling) time

TIME-to-MT
– time until the next service interval
“STAND BY MODE” screen

TOTAL HRS
– total time the dryer has been
switched on

RUN HRS - total dryer operating (cycling) time

This screen is not backlit
Indication of an upcoming service interval

100 hours prior to the next service interval, the
back lighting changes from white to orange and
the display shows the message “SERVICE DUE
IN XY HOURS”, where XY indicates the
remaining number of hours until service is due.

RUN HRS - total dryer operating (cycling) time
(RUN mode)
20.2. Dryers ADXX00 C
Start-up screen

The start-up screen appears for 5 seconds when
the main switch S1 on the dryer is switched to the
“I” position
“Adsorption dryer ADxx00C is ON”

the display is backlit in white.
The start-up screen is followed by the RUN MODE, STAND BY MODE and ECONOMY RUN MODE
screens based on the compressor control signal and the pressure dew point (PDP) value.