EKOM AD2250, Руководство пользователя

Страница: 33 / 92

PRODUCT MAINTENANCE
01/2020 -33- NP_AD500-2250-1_01_2020
PRODUCT MAINTENANCE
21. PRODUCT MAINTENANCE
The operator should carry out device checks regularly in the intervals defined by
applicable regulations. Test results must be recorded.
The device has been designed and manufactured to keep its maintenance to a minimum. For correct
and reliable operation of the dryer perform the following operations.
Risk of servicing by persons without required qualification.
Repair works beyond standard maintenance (see chapter 21 - product
maintenance) may only be performed by a qualified technician (organization
authorized by the manufacturer) or manufacturer’s customer service.
Standard maintenance works (see chapter 21 - product maintenance) may only
be carried out by a trained operator.
Only use spare parts and accessories approved by the manufacturer.
Risk of injury and damage to the device.
Before any maintenance work, it is necessary to:
- shut off the compressed air supply to the equipment
- check, if it is possible to disconnect dryer from the supplied equipment,
so that there is no risk of damage to a person using the given equipment
or any other material damages;
- vent pressure from the dryer chambers (see Chapter 21.1) and check the
pressure gauge on the equipment
;
- switch off the dryer;
- disconnect the dryer from the mains (pull the cord out of the mains socket)
Risk of injury when venting the compressed air.
Protect eyesight
– wear goggles when venting the compressed air from the
compressor pneumatic system (dryer chambers).
Risk of burn.
Dryer components (the compressed air inlet and cooler) are very hot during and
shortly after dryer operation
– do not touch these components.
Let the device cool before any product maintenance, service or connection/
disconnection of pressurized air.
Please follow the recommended service interval for the equipment to ensure
proper and safe operation.