EKOM AD2250, Руководство пользователя

Страница: 34 / 92

PRODUCT MAINTENANCE
NP_AD500-2250-1_01_2020 -34- 01/2020
21.1. Venting pressure from the equipment
The equipment is designed to allow safe venting of pressure within 10 seconds after the compressed
air source is shut off.
If pressure is not automatically vented from the dryer, the pressure may be vented manually.
Due to the noise generated during the venting process, it is recommended to
wear hearing protection.
Shut off the compressed air source before venting pressure from the equipment.
Venting pressure using the display unit

See Chapter 20.3 for the process of venting pressure using the display unit
Manual venting of pressure

Open the vent plugs on the outlet module on the equipment (Fig. 12).
Fig. 12: Venting pressure from the dryer chambers

Disconnect the hose (2) from the lower part of the condensate separator (3) (Fig. 13).
Fig. 13: Venting pressure from the cooler and condensate separator

The process of manually venting pressure from the equipment is complete after approximately
2 minutes.