IMPORTANT NOTES
This fire is an Inset Live Fuel Effect Gas Fire providing radiant warmth. It is designed to operate
on Natural Gas only.
It is the LAW that all gas appliances and fittings are installed by a registered competent
[1]
person
and in accordance with the Gas Safety (Installation and Use) Regulations 1998, the relevant British
Standards for Installation, Codes of Practice and in accordance with the Manufacturers’
Instructions. The installation shall also be carried out in accordance with the following regula-
tions:
The Building Regulations issued by the Department of the Environment, the Building Standards
(Scotland) (Consolidation) Regulations issued by the Scottish Development Department.
BS 5871 part 2
BS 5440 part 1
BS 6891
BS 6461 parts 1 and 2
BS 3456 part 201
BS-EN 60335
Failure to comply with these regulations could lead to prosecution and deem the warranty
invalid.
Consult all instructions before installation and use of this appliance.
This appliance is free from any asbestos material. Refractories and coal bed are construct-
ed from ceramic fibre.
1
Section
1.0
2.0
3.0
4.0
5.0
6.0
7.0
7.1
8.0
8.1
8.2
8.3
8.4
8.5
8.6
8.7
Contents
Important Notes
Appliance Data
Installation Requirements
Terminal Location
Site Requirements
Ventilation
Unpacking the Appliance
Component Checklist
Preparing for Installation
Outer Wall Aperture
Gas Supply Routing
Installation Method 1
Installation Method 2
Installation Method 3
Flue Preparation
Firebox and Tray
Page No.
1
2
2
3
4
5
5
5
5
6
6
7
8
9
11
11
Section
8.8
9.0
9.1
9.2
9.3
10.0
11.0
11.1
11.2
11.3
11.4
12.0
13.0
13.1
13.2
13.3
13.4
14.0
Contents
Fitting Fan Terminal
Fuel Bed Layout (Eko 3021 coal)
Fuel Bed Layout (Eko 3031 coal)
Fuel Bed Layout (Eko 3031 pebble)
Fitting the frame and front
Testing & Commissioning
Operating the Appliance
Spark Failure
Setting Pressure
Spillage Monitoring System
Testing for Spillage
Briefing the Customer
Servicing
Cleaning the Ceramics
Dismantling the Burner Tray
Checking the Fan Assembly
Control Box Removal
Troubleshooting Guide
Page No.
11
13
14
15
16
17
17
17
17
18
18
18
18
19
19
19
20
20
Note - For Republic of Ireland, reference
should be made to the relevant standards
governing installation, particularly in regard
to flue sizing and ventilation. See IS813, ICP3,
IS327 and any other rules in force.
1.0
©
2009 Focal Point Fires plc.
[1] GB - Gas Safe
TM
registered operatives (Northern Ireland only- CORGI registered operatives) are the only class of person considered as competent by the HSE under the Gas Safety (Installation and Use)
Regulations 1998.
