FUEL BED LAYOUT - continued
Eko 3031 MODELS
Pebble Effect Option
3. Take five more ceramic pebbles and position
as shown to form the ‘second row’ of the fuel
effect. The pebbles may be rotated as desired
to fit into the gaps between the supports in
order to create a random, realistic effect.
Again, remember not to push the pebbles
down too far into the valleys between the sup-
ports as this can have a detrimental effect to
the flame picture.
4. Now take another two pebbles and place
behind the second row of coals, next to each
other in the centre of the fuel bed. The pebbles
may be orientated as desired to achieve a real-
istic effect. Keep the spacing between the peb-
bles even and uniform.
5. Finally, take the four remaining large peb-
bles and place at the back of the fuel matrix as
shown.
Once again, the pebbles may be orientated as
desired in order to give a realistic effect. Avoid
pushing the pebbles down between the sup-
ports. The fuel bed layout is now complete.
The fire is designed to operate correctly
with the pebbles supplied when assembled
according to the instructions. Never add to
the sixteen pebbles, or change them for a
different type. Never throw rubbish or other
matter onto the fuel bed.
Due to the light
colour of the pebbles, some discolouration/sooting is to be expected during normal use.
FITTING THE DECORATIVE FRAME AND FRONT
The appliance is supplied with a decorative frame in a variety
of finishes. The frame is held onto the firebox by one of two
methods; either by magnetic pieces fitted to the steel back-
ing plates, or as a three piece clip-on assembly. If not pre-fit-
ted, the clip-on frame pieces should be hooked over the outer
edges of the fireframe, and pushed firmly home. The sides
should be fixed first, followed by the top bar, which overlaps
the sides. Push firmly home. A plastic protective film may be
applied to the outside of the frame and should be removed
at this stage.
IMPORTANT : Due to the possibility of sharp edges, care
should be taken when handling the three-piece frame
components. The use of protective gloves is recommend-
ed.
Place the decorative firefront in front of the fire and slide the ashpan door into place. The fire-
front shown in these instructions may be different to the one supplied with the appliance.
16
9.2
9.3
©
2009 Focal Point Fires plc.
