EKO MP-170, Руководство по эксплуатации

Страница: 3 / 55

2
Warnings
- Wiring to the PV power system has to be performed by authorized
personnel with the protective equipment for electric shock.
- Check the position and polarity of PV power output that the cables of
MP-170 are connected. Wrong connection may cause electric shock and
damage the PV power system and MP-170.
- Do not work with wet hands especially when connecting the terminal
block and/or the electrical outlet. There is a possibility of causing shock
hazard or electric leakage.
- Disconnect PV DC power line from the PV peripheral equipment of the
PV power system including the power conditioner, inverter, charge
controller and batteries. I-V measurement with these equipments
may cause the damage of MP-170 and the equipment. MP-170
measures only DC power from PV module/array.
- Use cables and connection terminals that satisfy the stated electric
power capacity for the PV device. Connect them surely so that they
will not come off from the connectors.
- Do not use MP-170 for other than original purpose.
- Do not open, disassemble, modify, or touch the inside of MP-170.
High power electricity may still remain inside of MP-170, and it may
cause electric shock.
-
Check and make sure the power supply voltage to MP-170 (DC12V)
before turning ON the power switch of MP-170 and the power supply.
- Do not use any other AC adapter other than the one supplied.
- Turn off the power of MP-170 immediately when you notice any smoke
or abnormal odor occurring from MP-170.
- Do not use MP-170 in places where it is exposed to vibrations, impact
shock, high humidity, dust, sudden temperature changes and/or near
any object which has strong magnetic or electric fields.
- Do not use MP-170 in rainy or wet conditions. MP-170 is not
waterproofed.
!