EKO MP-170, Руководство по эксплуатации

Страница: 20 / 55

19
6-2. Starting MP-170
1) Connect the Main unit and the Sensor unit with modular cable.
2) Power ON the sensor unit
After power on the sensor unit, the Green LED will light for a few seconds and
then start blinking once a second
3) Power ON the Main unit
Start screen appears on the LCD display.
After getting the connection and time is synchronized between the Main unit
and the Sensor unit, the main menu screen is shown.
When “Powering on Sensor unit.” appears:
A) Check the connection and power of the sensor unit.
B) Turn ON the Main unit and the Sensor unit again.
Press any key to go to main menu.
PORTABLE I-V CHECKER
MP-170
Ver.0.09.12
EKO INSTRUMENTS
Firmware version
Battery monitor:
Check for the battery
condition when
operating with battery.
PORTABLE I-V CHECKER
MP-170
Ver.1.0.0
EKO INSTRUMENTS
Powering on
Sensor unit.
!