Eiki WL-30, Руководство пользователя

Страница: 81 / 99

81
10. How to Use the PJ Controller
PC adjustment
This feature optimizes the signal from the
connected computer to display the screen.
✳
PC adjustment screen is displayed only when
Computer1 (Analog) or Computer 2 (RGB) is
selected for the input source.
Parameter Description
Current Mode ..................Display computer mode
Auto PC adjustment..........Executed by clicking Start button.
Fine sync ..........................Click
7 8
to adjust the value
Total dots ..........................Click
7 8
to adjust the number to fit your computer image.
H Position ........................Click
7 8
to adjust the horizontal position.
V Position..........................Click
7 8
to adjust the vertical position.
Clamp................................Click
7 8
to adjust the clamp level.
Display Area H ..................Click
7 8
to decrease/increase the value to fit resolution of the image.
Display Area V ..................Click
7 8
to decrease/increase the value to fit resolution of the image.
Load Setting No. ..............Load the preset settings (Mode 1–5)
Save Setting No. ..............You can save the settings of the PC adjustment. Select the mode number you
wish to save and click “Set”.
✳
If you want to delete the content in the mode. Select the mode and click
“Mode free”.
Comment..........................You can save a note regarding the PC adjustment. Click “Save” to save the note.