Efka AB600A5015, Руководство по эксплуатации

Страница: 52 / 64

- AB600A5015 Parameter List
- 52 -
12.2 Technical level
(Code no. 1907)
Parameters Designation Unit Max Min Preset Ind.
100 SSc Number of softstart stitches Stitches 254 0 2
110 n1 Positioning speed for threading (mode 66) RPM 390 70 200
111 n2 Upper limit setting range of the maximum speed RPM 9900 n2_ 5000
114 n5 Speed after light barrier sensing RPM 9900 200 1200
115 n6 Softstart speed RPM 9900 70 500
116 n7 Trimming speed RPM 700 70 200
118 n12 Automatic speed for stitch counting RPM 9900 400 3500
119 nSt Speed stage graduation
1 = Linear
2 = Slightly progressive
3 = Highly progressive
3 1
121 n2 Lower limit setting range of the maximum speed RPM n2_ 200 400
122 n9 Limited speed n9 RPM 9900 200 2000
128 ASd Start delay, when
command “start” is given by covering
the light barrier (see parameter 129)
ms 2000 0 0
129 ALS Machine start by covering the light barrier (only in conjunction with
parameter 132 = 1)
0 = Function Off
1 = Light barrier covered

pedal forward (>1)

machine run pedal
controlled.
2 = Pedal forward (>1)

light barrier covered machine run

pedal
controlled.
3 = Light barrier covered

machine run at automatic speed n12
(without pedal)
4 = Pedal forward (>1)

light barrier covered machine run

pedal
controlled.
5 = Light barrier covered

machine run at automatic speed n12
(without pedal)
Attention! If 129 = 3, the machine starts immediately after covering
the light barrier without influence by the pedal! It can be stopped only
by uncovering the light barrier or by machine run blockage!
If machine run blockage is disabled, the machine starts immediately
even if the light barrier is still covered!
6 = The same as 3, run without pedal when covering the light
curtain, however start up only when FI is lowered.
3 0 0
130 LSF Light barrier filter for knitted fabrics 1 0 0
131 LSd 0 =
Light barrier sensing “covered”
1 = Light barrier sensing uncovered
1 0 1
132 LSS 0 = Machine start possible with light barrier uncovered or covered.
1 = Machine start blocked with light barrier uncovered if parameter
131 = 1.Machine start blocked with light barrier covered,
1 0 1
133 LSE Thread trimming operation, when completing the seam after light
barrier sensing On/Off
1 0 1
134 SSt Softstart On/Off 1 0 0
140 dnE Delay of seam end with pedal in pos. -2 ms 2550 0 0
141 SGn Speed status for the seam with stitch counting
0 = Speed controllable by the pedal up to the set maximum speed
(Parameter 111)
1 = Fixed speed (Parameter 118) without influence by the pedal
(machine stop by pressing the pedal to the basic position)
2 = Limited speed controllable by the pedal up to the set limit
(Parameter 118)
3 = At fixed speed (Parameter 118) can be interrupted by full
heelback -2
4 = At fixed speed (Parameter 110) can be interrupted by full
heelback -2
4 0 0
142 SFn Speed status for the free seam and for the seam with light barrier
0 = Speed controllable by the pedal up to the set maximum speed
(Parameter 111)
1 = Fixed speed (Parameter 118) without influence by the pedal
(machine stop by pressing the pedal to the basic position)
2 = Limited speed controllable by the pedal up to the set limit
(Parameter 118)
3 = At fixed speed (Parameter 118) can be interrupted by full
heelback (only for seams with light barrier).
3 0 0
153 brt Braking power at machine standstill 50 0 15