Efka AB600A5015, Руководство по эксплуатации

Страница: 53 / 64

- AB600A5015 Parameter List
- 53 -
Parameters Designation Unit Max Min Preset Ind.
155 LSG Mode signal run
0 = Signal Off.
1 = Signal run On.
2 =
Signal “run” enabled when the speed is >3000 RPM.
3 = Signal with pedal <> 0.
4 = Signal enabled only after motor synchronization (one rotation at
positioning speed after power On).
5 = Motor runs Eco with setting F-84 and F-85
6 = Motor runs the same as chain suction at the seam start / end
with counter F-084 and F-085
7 = The same as 6, however chain suction at the start of the seam
can be interrupted and with switch-off delay F-156
7 0 1
156 t05 Switch-
off delay for the signal “run” or signal with pedal in
pos. 0 (neutral)
ms 2550 0 0
161 drE Direction of motor rotation
0 = Clockwise rotation
1 = Counterclockwise rotation
1 0 1
170 Sr1 - See Section Fehler! Verweisquelle konnte nicht
gefunden werden. Setting the reference position
(Parameter 170)
172 Sr3 See Section 6.10 Indication of the setting of the positions
173 Sr4 See Section 8 Signal test OFF
176 Sr6 Service routine for total operating hours display.
The process is as with display example of parameter 177.
177 Sr7 Service routine for display of hours since the last service.
Display example for the operator control panel:
Press the E key

Display Sr7=
Press the >> key

Display h t
Press the E key

Display 0000
Press the >> key

Display h h
Press the E key

Display 0000
Press the E key

Display Min
Press the E key

Display 00
Press the E key

Display SEc
Press the E key

Display 00
Press the E key

Display MS
Press the E key

Display 000
Press the E key

Display rES
Press the E key again to restart routine, or press the P key twice to
return to operational status
179 Sr5 Display of control program number with index and more identification
numbers. The data is displayed in sequence by keystroke.
Display example for the operator control panel:
Press the E key

Display Sr5=
Press the >> key

Display e.g. 5030 (Prog. No.)
Press the E key

Display e.g. A (Index)
Press the E key

Display e.g. 06 (Year)
Press the E key

Display e.g. 10 (Month)
Press the E key

Display e.g. 24 (Day)
Press the E key

Display e.g. 16 (Hour)
Press the E key

Display e.g. --
Press the E key

Display e.g. ----
Press the E key again to restart routine, or press the P key twice to
return to operational status