Efka AB600A5015, Руководство по эксплуатации

Страница: 51 / 64

- AB600A5015 Parameter List
- 51 -
Parameters Designation Unit Max Min Preset Ind.
019 -Pd 0 = Pedal in pos. -1 blocked in the seam. But with pedal in pos.
-2 sewing foot lifting is possible in the seam (function active
whenever the light barrier is On)
1 = With pedal in pos. -1 sewing foot lifting is blocked in the seam.
2 = Pedal in pos.
–2, thread trimming disabled. (Function only if
parameter 009 = 1)
3 = Pedal in pos.
–1 and –2 enabled in the seam.
4 = Pedal -1 and -2 locked in the seam (function only when
parameter 009 =1)
5 = Start seam end by with pedal -1
5 0 3
023 AFL Automatic sewing foot lifting with pedal forward at the seam end, if
light barrier or stitch counting is On.
0 = Automatic foot lifting off
1 = Automatic foot lifting On
1 0 1
025 tFS Start counting (pa. 157) for thread tension release at the start of the seam
0 = Start counting at the start of the seam
1 = Start counting when the light barrier is covered
1 0 1
026 APd Characteristic of the "analog pedal"
0 = Analog function off
1 = 12-level, like previous pedal function
2 = continuously variable
3 = 24-level
4 = 60-level
5 = 48-level
6 = 48 level / standing operation (SOP; foot control 304)i
6 0 4
027 plu Area for s 1/2 of the analog pedal in percent 80 10 30
041 EZP Special pedal function Single stitch / Full stitch
0 = Function Off
1 = Single stitch (assuming needle up to needle down). Afterwards
alas a complete hand wheel rotation in speed n9)
2 = Full stitch (a complete hand wheel rotation in speed n9)
3 = Speed limitation up to F-042
2 0 0
042 GrP Pedal travel forwards for detection of the special pedal
function
% 100 0 40
049 KML Coupling motor running (o) signal (F-290=7)
=0 OFF
=1 Coupling with pedal Mi1 & pedal Mi2 in the seam
=2 Coupling with pedal Mi1 & pedal Mi2 outside of the
seam
=3 Coupling with pedal Mi1 & pedal Mi2 in and outside of
the seam
3 0 0 049 KML
051 dPd Time for detection of the special pedal function ms 2550 0 100
082 DDr Suck stitches to waste Stitches 254 0 25
083 tDr Time sucking waste ms 5000 0 0
084 Mle Stitches for motor ECO On Stitches 254 0 5
085 Mla Stitches for motor ECO runs down Stitches 254 0 5
088 kla Stitches for clamping the seam start (mode 68) Stitches 20 0 3