manualshive.com logo in svg
background image

6

Deutsch

Español

SICHERHEITSVORKERUNGEN

NORMAS DE SEGURIDAD

1

3

4

2

ACHTUNG: Bei richtiger Anwendung ist die Motorpumpe
ein bequemes und wirkungsvolles Arbeitsgerät; falls Sie
sie falsch oder ohne die nötige Vorsicht einsetzen, kann sie
zu einer Gefahr werden. Beachten Sie bitte daher unbedingt
die Sicherheitsvorschriften die Sie nachstehend in der
Betriebsanleitung finden, damit ihre Arbeit immer
angenehm und sicher ist.

1 - Bewahren Sie dieses Handbuch sorgfältig auf und lasen Sie es

vor jeder Inbetriebnahme der Maschine.

2 - Tanken Sie den Motor nur in ausgeschaltetem Zustand auf und

achten Sie darauf, daß kein offenes Feuer in der Umgebung iist,
Rauchen Sie auch nicht beim nicht Auftanken und vermeiden
Sie, Benzin auf den Schaldämpfer zu verschütten (Abb. 1). Nach
dem Auftanken die Motorpumpe zu einem anderen Platz tragen
zum Start (Abb. 2). Entfernen Sie nicht den Bezintankdeckel,
während der Motor noch warm ist oder während der Motor läuft.

3 - Vor dem Start überprüfen Sie den Gashebel auf einwandfreie

Funktion.

4 - Die Maschine nie ohne füllwaser in der Pumpe einschalten.

Es können sonst beträchtliche Schäden am Motor enstehen.
Der Hersteller kann in diesem Falle keine Garantie übernehmen.

5 - Halten Sie bei der Verwendung der Motorpumpe andere

Personen und Tiere fern  (Abb. 3).

6 - Benutzen Sie die Motorpumpe nicht in der Nähe von

Elektrokabeln oder Elektro-Geräten  (Abb. 4).

7 - Am Saugschlauch muss immer ein korb verwendet werden, da

mit kein Schlamm in das Pumpengehäuse dringt, was zu einer
Beschädigung der Flügel führen könnte.

8 - Die Motorpumpen dieser Baureihe sind zum Pumpen von

Wasser ausgelegt. Benutzen Sie die Motorpumpe nicht zum
Pumpen von entflammbaren Substanzen, Chemikalien oder
Labensmitteln, Suspensionen von Produkten, die abschleifende
Wirkung haben, können zur Beschädigung der Dichtung und der
sich drehenden Pumpenteile führen.

9 - Nach dem Pumpen von Meerwasser oder Schwarzwasser muß

die Pumpe mit frischem Wasser durchgespült werden.

10 - Den Kerzendeckel immer abnehmen, bevor Wartungs-,

Reinigungs- oder Reparaturarbeiten an der Maschine
durchgeführt werden.

11 - Unterlassen Sie die Funkenprüfung der Zündkerze in der Nähe

der Zylinderöffnung, um unbeabsichtigtes Zünden von Benzin-
dämpfen aus dem Zylinder zu vermeiden.

12 - Allen Schrauben und sonstigen Befestigungsmitteln nachprüfen.

Nichts darf locker sein.

13 - Die laufende (oder noch warme) Pumpe nicht in unmittelbarer

Nähe leicht entflammbarer Materialien aufbewahren.

14 - Auspuff und andere Teile sind heiß. Nicht anfassen!
15 - Wenn Sie den Pumpe transportieren, Schließen Sie den

Kraftstoffhahn und drehen den Tankverschluß gut zu. Bei
Transport über längere Entfernungen oder auf unebenem
Gelände ist auch der Kraftsofftank zu leeren.

16 - Achten Sie auf gute Abzungsmöglichkeiten der Abgase.

Benutzen Sie das Gerät nicht in der Nähe von explosiven oder
brennbaren Stoffen oder in geschlossenen Räumen (Abb. 5).

17 - Kontrollieren Sie die Motorpumpe täglich, um sicherzustellen,

daß sowohl die Sicherheits-sowie auch alle anderen
vorrichtungen korrekt funktionieren.

18 - Folgen Sie bei den Wartungsarbeiten stets unseren

Anweisungen.

19 - Arbeiten se nicht mit beschädigter, fehlerhaft reparierter, falsch

montierter oder willkürlich abgeänderter Motorpumpe. Entfernen,
beschädigen oder ändern Sie nie die Schutzvorrichtungen.

20 - Nehmen Sie nie alleine Reparaturen oder Arbeiten vor, die nicht

zur normalen Wartung gehören. Wenden Sie sich ausschließlich
an spezialisierte Vertragswerkstätten.

21 - Benutzen Sie keinen Kraftstoff (Gemisch) für die

Reinigungsarbeiten.

22 - Bewahren Sie die Motorpumpe an einem trockenen Ort, vom

Boden entfernt und mit entleertem Tank auf.

23 - Sollte es notwendig sein die Motorpumpe aus dem Verkehr zu

ziehen, händigen Sie sie ihrem Vertragshändler aus, der für die
entsprechende Aufbewahrung sorgt.

24 - Wenden Sie sich füe eventuelle Klärungen oder Eingriffe immer

an den Händler hres Vetrauens.

ATENCION - La motobomba, si se emplea bien, es un
instrumento de trabajo cómodo y eficaz; si se usa
incorrectamente o sin las debidas precauciones puede
convertirse en un instrumento peligroso. Para que su trabajo
sea siempre agradable y seguro, respete escrupulosamente
las normas de seguridad indicadas a continuación en el
presente manual.

1  - Consevar cuidadosamente el presente manual de instrucciones y

consultarlo en cada ocasión en que la máquina sea utilizada.

2  - Llenar el deposito de combustible con el motor parado y lejos del

fuego 

(Fig. 1). No fume cuando llene ed deposito (Fig. 1).

Asegurese de no derramar el combustible sobre el escape.
Despues de llenar el deposito, lleve la motobomba a otro sitio antes
de volver a ponerlo en marcha

(Fig. 2). No quite el tapon del

deposito cuando el motor aún esta caliente o en marcha.

3  - Antes de poner en marcha el motor, comprobar que el acelerador

se desplaza libremente.

4  - Nunca ponga en marcha la máquina sin agua de purga en la

bomba. Tal descuido ocasionará serios daños en las piezas del
motor, y la garantia quedará anulada en tal caso.

5  - Utilizar la motobomba lejos de personas y animales

(Fig. 3).

6  - No se debe de utilizar la bomba cerca de cables o aparatos

eléctricos

(Fig. 4).

7  - El filtro debe utilizarse siempre en la manguera de aspiración, a fin

de evitar la entrada de impurezas en el cuerpo de la bomba y
posibles daños en la turbina.

8  - Las motobombas de esta gama estàn pryectadas para bombear

agua. No usar la motobomba para recoger productos inflamables,
substancias quimicas o productos alimenticios. Las particulas de
productos abrasivos pueden dañar la junta y la parte rotante de la
bomba.

9 - Después de bombear agua de mar o purines, lave la bomba con

agua dulce.

10 - Quitar el capuchión de la bujia cada vez que se realizan

operaciones de mantenimiento, limpieza o reparaciones en la
máquina.

Impaginato  16-06-2006  15:49  Pagina 6

Содержание PA 1030

























Отзывы: