Parameterization
Page 42 of 72
MSM-USM2G-BA-UK-004
Fig. 5.7: Submenu New/adapt
After selecting the desired fault annunciator from the list, the device is automatically created and
appears under the name Slave device 1 to Slave device 3 in the main menu "Parameters". The menu
of a newly created slave annunciator corresponds to the menu of the master device. However, the
"Reporting sequence" tab is missing, since the reporting sequences of the slave annunciators are
identical to those of the master annunciator.
By this means, up to three slave devices can be added. Each slave will be displayed under the name
Slave-device
1…3 in the menu „Parameter“ – independent from the defined device name.
By click on the paper bin symbol the respective last slave device in the cascaded system can be
deleted again.
The device type of the master device cannot be changed, as this is determined by the hardware used.
Fig. 5.8: Paper bin - symbol of the last annunciator in the cascaded system
Fig. 5.9:
Menu „Parameter“, complemented with the entries „Slave-device 1…3“
