Parameterization
Page 40 of 72
MSM-USM2G-BA-UK-004
5.3 Main menu Parameter
The main menu is divided into the three subgroups Devices, Protocols and the Factory setting
function.
Fig. 5.5: opened main menu
„Parameter“
Subgroup System
Device administration
o
Creation or deletion of devices in a fault alarm cascade
o
Ex- and import of parameters
o
Generation of Parameter Setting Dump (up from V3.6)
System
o
System time
o
Network settings
o
Passwords
o
Activation/deactivation of device error alarms
o
Firmware Update
o
Management of licenses (IEC 61850)
Master device (fault alarm functionality)
o
Alarm/reporting channels
o
Alarm/reporting sequence
o
Buttons & function inputs
o
Relays (function relays)
o
Repeat relays
o
LED color adjustment
o
Analog channels
Slave device 1..3 (fault alarm functionality)
If Slave devices of a fault alarm cascade have been created, their fault alarm functionality can
be parameterized here analogous to the Master device.
Subgroup Protocols
IEC 61850
IEC 60870-5-101/104
Modbus
EES factory defaults
Resets all parameterized devices (also slave devices) to factory settings. The factory setting must
then be saved in the devices with the function "Accept configuration" (only Master device) or "Accept
all 4 configurations" (Master device and all Slave devices).
Caution: The factory setting function also resets the IP address of the fault annunciator
to the delivery status!
