EES BSM 1 Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 71

background image

Contact

Contact

Use and product lifecycle

Elektra Elektronik GmbH & Co Störcontroller KG

|

Hummelbühl 7-7/1

|

71522 Backnang

|

Germany

Tel.: +49 (0) 7191/182-0

|

Fax: +49 (0) 7191/182-200

|

E-Mail: [email protected]

|

Internet: www.ees-online.de

Tel.: +49 (0) 7191/182-0

|

Fax: +49 (0) 7191/182-200

|

E-Mail: [email protected]

|

Internet: www.ees-

7.4 Packaging and transport

If it is necessary to transport the product for repair purposes or relocation, appropriate packaging and
transport conditions must be ensured so that the device is not affected in any way during transport.

7.5 Spare parts

The partial or complete failure of the product may be prevented by appropriate repair work using
suitable spare parts, which, due to the complexity of the device, may only be carried out by the
manufacturer. Please contact our customer service:

7.6 Disposal

The disposal of defective products or old devices can have potentially negative effects on health and
the environment, therefore they must be disposed of in a harmless and environmentally friendly
manner in accordance with the regional statutory disposal regulations. Alternatively, a return delivery
to the manufacturer should be considered.

Packing instructions:

Please make sure you use suitable shipping packaging (original packaging if
possible).
Please observe country-specific regulations for the shipment of electronic
products.

Technical service

:

Elektra Elektronik GmbH & Co Störcontroller KG
Hummelbühl 7-7/1
71522 Backnang
Tel.:      + 49 (0) 7191/182-0
Fax:     +49 (0) 7191/182-200
E-Mail:

[email protected]

Disposal instructions:

Returning the packaging to the material cycle reduces the amount of waste and
saves raw materials. Dispose of packaging materials that are no longer required
at the regional collection points for the dual recycling system. If possible, save
the packaging during the warranty period so that you can properly pack the
device in the event of a warranty claim.

The disposal of the device itself is covered by the scope of electrical waste. If
necessary, contact your local waste disposal company for information on
suitable disposal methods. Do not dispose of electrical equipment in household
waste, but use the regional collection points. If electrical devices are disposed of
in an uncontrolled manner, hazardous substances can enter the groundwater
and thus the food chain during weathering or poison the flora and fauna for
years.

«
...
69
70
71

Содержание BSM 1








































































Отзывы:

Нет отзывов

Похожие инструкции для BSM 1

Бренд: Samson Страницы: 20

medialon Showmaster Go

Бренд: 7th Sense Страницы: 2

Бренд: CALEFFI Страницы: 12

QuickSetter+ 132 Series

Бренд: CALEFFI Страницы: 5

Бренд: Fagor Страницы: 10

Бренд: Fagor Страницы: 358

Бренд: Fagor Страницы: 556

Бренд: Fagor Страницы: 172

Бренд: Fagor Страницы: 180

Бренд: Fagor Страницы: 112

Master Control Unit

Бренд: FaderMate Страницы: 36

Бренд: Gate Motors Страницы: 6

Бренд: u-blox Страницы: 28

Бренд: K&G GROEP Страницы: 27

Бренд: CAME Страницы: 2

Бренд: CalAmp Страницы: 13

Бренд: Eaton Страницы: 8

Бренд: ABB Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды