![Edwards nRVi Скачать руководство пользователя страница 18](http://html1.mh-extra.com/html/edwards/nrvi/nrvi_instruction-manual_2366141018.webp)
Item Number Description
Details
11
Start button
The pump will accelerate up to full running
speed. * The run indicator will flash while
accelerating. The run indicator will remain on
when the pump reaches full speed.
12
Run indicator
Indicates that the pump is running.
13
Stop button
The pump will decelerate and stop running.
The run indicator will flash while
decelerating. The run indicator will go off
when the pump has stopped.
14
Power indicator
Indicates that electrical mains supply to the
pump is on.
15
Service indicator
Indicates that a service interval has been
reached.
16
Alarm indicator
Indicates an alarm has been triggered.
17
Auto run indicator
Indicates that the auto run mode has been
selected.
* The pump is set to 30 Hz rotational full speed (factory default)
2.2.1 Logic interface
The pump controller can be operated using a 15-way D-type logic interface connector.
There are two types signals on the logic interface.
The signal types are:
▪
Control inputs: these are switch-type and analogue signals that are used to control
the pump.
▪
Status outputs: these outputs identify the status of the system.
The logic interface has been designed to support both serial and parallel control and
monitoring, operating through one connector. For serial control either RS232 or RS485
can be selected.
For control modes, refer to
Table: Typical installation system configurations on page 34
.
For more information about the logic interface, refer to
Logic interface data on page 24
.
2.3 Operational features
The pump has two controls: the mode selector and the gas ballast control. Six possible
combinations of these controls allow for a wide choice of operating characteristics to
optimise the performance of the pump for a given application.
2.3.1 Mode selector
The pump has a mode selector which has two selectable positions to control the High
Vacuum and High Throughput.
▪
The High Vacuum mode is specified by the symbol.
▪
The High Throughput mode is specified by the symbol.
Page 14
A65901880_D - General description
Содержание nRVi
