Page 24
Solution-8 Installation Manual
ISSUE401.DOC
Electronics Design & Manufacturing
Customer Client Code
Locations 52 - 55
0000
This code is transmitted to identify the calling unit. Enter the desired client number in the four locations
provided. For 3 + 1 and Pager formats, location 52 is ignored and the first digit of the Client Code required
must go in location 53. When using domestic format then the identification beep is selected by the number in
location 55 thus allowing domestic format the ability to identify 15 different systems calling the same number.
Installer Code
Locations 56 - 61
123400
This code can be four or six digits long and is used to enter the Installers Programming mode. The default code is
123400 however since trailing zeros need not be entered, 1234 will work for both 4 or 6 digit code length modes.
1
WARNING
DO NOT program "10" for "0" in the Master or User codes.
USER 1 (Master Code)
Locations 62 - 67
258000
This code will be needed when specialised functions are performed from the operators mode. The master code
holder is the only person that can alter user codes.
