15
2. Feed the power connection wire through the cable-cross hole at the back of the indoor unit
and then pull it through the front side of the unit.
3. Remove the wire clip. Connect the power connection wire to the wiring terminal according to
the color. Tighten the screw and then fix the power connection wire in place with the wire clip.
4. Replace the wiring cover and then tighten the screw.
5. Close the front panel.
Note:
All wiring in the indoor unit and the outdoor unit should be connected by a professional.
If the length of the power connection wire is insufficient, contact the supplier for a new one. Do
not extend the wire yourself.
Use an electrical supply and circuit breaker that is properly grounded in accordance with the
National Electrical Code and all state and local codes and ordinances.
