Ecom B, Руководство по эксплуатации

Страница: 12 / 43

Page 12 ecom-B
4.4. Soot...Oil trace
Under
„Soot...Oil trace“
the measurement results for boiler temper-
ature, soot number and oil derivative can be entered. Select the cor-
responding line in the display and activate the entry by
<Enter>
. The
input for boiler temperature and soot number (3 measurements) can
be done as follows:
-select with the keys
<store>
(left) and
<Print>
(right) the position
which should be changed (corresponding field is blinking)
-enter the designated number with the curser keys
<up/down>
By pressing the key
<Enter>
the entry will be transferred to the data
record of the measurement. The result of the oil derivative checking
will be documented as follows:
-set cursor to line
„Soot...Oil trace“
-select the result with the key
<Enter>
(
“No”
,
“Yes”
or
“- - - “
)
When all necessary entries have been made the entry can be closed
by pressing the key
<ESC>
. The measurement is now completed.
4.5. Record and print Measurement
After scrolling back to the gas measure-
ment with the cursor keys
<up/down>
the
measurement can be transferred to the
internal memory with
<Enter> / <Store to
memory> / Enter>
(after successful stor-
age an
“M”
will appear right down in the
display). Finally a print-out (IR printer re-
quired) of the results can be made (key
<Print>
).
After the gas analysis, please transfer the recorded
data (intermediate memory) into the internal
instrument memory otherwise the values will
get lost by instrument switch-off!
Soot...Oil trace
T.Boiler --- °C
1.Soot meas. ---
2.Soot meas. ---
3.Soot meas. ---
Oil trace ---
Input:
↵ ↵↵ ↵
Display/Memory
Memory
Store to memory
Display values
CO MV ON/OFF
Continue with:
↑↓
↵
↵↵
↵