73
Set
tings
o
2.
Amplified Output
:
settings for the 4
amplified
outputs
.
•
Label:
output
label
.
•
Gain:
Amplifier
gain
at the output.
o
Disabled:
option disabled
if the Smart
VersaPower function is enabled.
o
Gain options.
If
the
Smart VersaPower tool is not used, use the limiters
available in the processing section to not damage the
equipment
.
•
User Range
. Volume limits set by the user via user
panels.
•
Mode:
selection of mono or stereo mode.
•
Polarity
: selection of the polarity of the signal.
•
HPF
: selection of the high-pass-filter frequency. Always
enabled when the output is configured as 100/70 V line
output.
•
Colour:
allows assignment of a colour to an output.
Related events
Outputs can be controlled by events, either physical controls (rotary controls,
GPIs...), virtual controls (panels) or automations (calendar events).
If any
outputs are associated with an event, the following automatic settings are
made when switching mono or stereo mode
:
•
Mono to stereo output
: Events related to the odd output are maintained, with
the stereo pair configured as the event output. Events related to the even
output are maintained, with no output assigned.
Stereo to mono output
: Events related to the stereo pair are maintained, with
the odd output configured as the event output. Does not apply to even output.
We recommend reviewing event configuration when there is a configuration
change on the outputs
(mono to stereo, or stereo to mono)
and
the outputs
have
associated events
.
