22
Set
tings
REMOTE CONTROL CONNECTIONS
ON / OFF No
GPIs
x4 GPIs (0-10V)
Function and settings by embedded web application
5-pin Euroblock connector, rear panel. Euroblock pitch 3,5
mm
GPOs
x4 NC / NO contacts
4x 3pins Euroblock connector, rear panel
Euroblock pitch 3,5 mm
External MUTE
Yes, contact (2 pins Euroblock connector, rear panel,
Euroblock pitch 3,5 mm)
LOCAL CONTROL
Attenuators
Programmable Front panel knobs (defaults: Amplified OUTs
attenuators)
Output mode settings
Lo-Z/Hi-
Z, 70V/100V, 4Ω/8Ω/2Ω
Output mode selection per channel
(Rear panel DIP SWITCH selectors)
RUN/SLEEP mode
Yes, front panel push-button (operate when pressed more
than 0,5 seconds)
Power ON/OFF Yes, back panel switch (red LED indicator)
CONNECTIVITY
Ethernet
Ethernet Base-Tx 10/100/1000Mb Auto X-Over
(CAT5 up to 100m. Settings by embedded web application)
DANTE
™
/ AES67 Protocol
Dante
™
/ AES67 4x Tx / 4x Rx channels
Primary and secondary capability. RJ-45 ports
(Settings by embedded web application)
Programming and control Embedded web application
MONITORING
Signal Present SP LED (White) per channel (trigger @- 40 dBV)
Clipping
CLIP LED (Red) per channel (Clip, Versa power limiter, Peak
power, Power supply overload)
Protect
PROT LED (Red) per channel (Current overload, Output
short circuit, Under voltage, Over Voltage,
DC OUT (slow blink), HF protect (fast blink)
Standby / Mute
STBY/MUTE LED (White) per channel
(ON when STBY, BLINK when MUTE)
Limit
LIMIT LED (Red) per unit
(Power (power supply) overload)
Thermal THERMAL LED (Red) per unit (Temperature limiter)
Dante
™
/ AES67
DANTE
™
/ AES67 LED (White) per unit (OFF NO WIRE, ON
when MASTER, BLINK when SLAVE)
Data DATA LED (White) per unit (ON when DATA)
On ON LED (White) per unit (ON when RUN,
SLOW BLINK when SLEEP by BUTTON, FAST BLINK when
SLEEP by AUTOSTBY, VERY FAST BLINK when HW Fault)
