16
Set
tings
4.11
ETHERNET PORTS
The
RJ-45-type ETHERNET connectors
on the rear panel
, named NET1 and NET2, allows
the equipment to be connected to an Ethernet network, or directly to a computer or other
device with an Ethernet interface, point-to-point.
This
connection enables, within a local network, the following
:
•
Global programming and management
of the VIDA unit using the VIDA embedded
web application and a standard web browser running on a computer, tablet, etc.
•
Connection of client devices for end-user management
of areas of the installation
through the VIDA application, compatible with Android and iOS, or through standard
web browsers running on computers, tablets, etc.
•
Connection to Internet for clock synchronization
(calendar events), automatic,
firmware updates and other tools.
•
Reception of 4 channels of digital audio Dante
™
/ AES67
and sending of 4 channels
of digital audio Dante
™
/ AES67.
•
Connection of third-party devices for integration in control systems
(Crestron®,
Extron®, AMX®, Vity®, Medialon®, etc., registered trademarks by their
manufacturers), using the NET protocol embedded in VIDA devices.
NET protocol manual for more information.
Dante
™
/ AES67 digital audio license is included.
VIDA features two ports with RJ-45 interface in its rear panel:
•
Net1 (Control):
WebGUI, control panels, third party control and other control
packages are sent/received over Net1.
•
Net2 (C Dante
™
/ AES67):
control and Dante
™
/ AES67 Audio perform over
the same network.
Use Net1 and Net2 in different networks
. Configuring both, Net1 and Net2, over
the same local network might cause malfunctioning in network features of the device.
