68
Set
tings
8.10
IO SETUP (INPUT AND OUTPUT SETUP)
Configuration of inputs and outputs
for an amplifier
.
8.10.1
INPUTS SETUP
Adjustment of
the
audio inputs
available on an amplifier.
1.
Analogue inputs
Adjustment of the 4 balanced analogue line inputs.
•
Label:
label for an input.
•
Trim
: digital gain adjustment, 0-12dB.
•
Level:
adjustment of signal level, mute and VU.
•
Mode
: selection of mono or stereo mode.
•
Polarity
: selection of the polarity of the signal.
Stereo signals:
•
Only adjacent signals can be configured as a stereo pair.
•
The odd signal configuration will be applied to the stereo pair.
•
When undoing stereo, the odd signal keeps the stereo pair configuration and
the even signal has the configuration it had in mono.
•
A stereo pair is displayed as a single input/output.
•
The amplifier performs the routing of a stereo signal automatically. Like this: if
a stereo signal is sent to a mono output, the stereo sum will be sent; and if a
mono signal is sent to a stereo output, the same signal will be sent to both
outputs.
