95
Set
tings
Group configuration
:
o
Label:
group label.
o
Volume control and
group
mute
.
o
User Range
. Volume limits set by the user
via user panels.
o
Colour
: allows assignment of a colour to
the group.
Assignment of outputs
to the general volume
group.
3.
Net Groups
VIDA has
four volume control network groups
. The network groups
do not have
source selection and equalisation
. Network groups
allow control of volume for
several outputs belonging to different devices simultaneously
.
•
The group volume controls are located at the end of the processing chain.
•
An output can belong to several network groups.
•
If an output belongs to different groups, its volume will be affected by the
different volume controls of the network groups.
•
There is a maximum of four network groups per amplifier group (Group ID).
•
Groups are shared by all devices that are on the same network and belong
to the same amplifier group (Group ID).
•
An output can belong to several network groups.
•
An amplifier can only belong to one amplifier group (Group ID).
•
The network groups and Group ID are independent of the VIDA amplifier
model. The network groups allow control of the volume of different outputs
belonging to different VIDA amplifier models: VIDA-16Q
*
, VIDA-24Q and
VIDA-48Q
*
*
VIDA-16Q and VIDA-48Q will be available soon.
If the two network interfaces, NET1 and NET2, are connected the network
groups will communicate via the NET1 interface only
. If only one network interface
is connected, the network groups will communicate over that interface.
