50
Set
tings
•
Auto Sleep Mode:
When activated, the amplifier will enter power-saving mode
(Sleeping) when all 4 amplified outputs are in Standby and will automatically
return to normal operation (Running) when:
o
An amplified output is not in Standby mode.
o
The button on the front panel is pressed. If enabled.
o
The "Power" button on the STATUS page is pressed.
o
An event or user control causes one of the amplified outputs to exit
standby.
The
digital inputs and outputs are disabled when the device is in
power-saving mode
.
If any of the analogue inputs carries an audio signal
, even if not
assigned to a Source, the device will remain operational and
will not enter
power saving mode
.
•
Front Panel On/Sleep Button
: Enables or disables the ON/SLEEP button on the
front panel to prevent unwanted operation.
To switch the device off completely
, use the
"Power" button on the
2.
Auto Standby
Configuration of auto standby for amplified outputs independently.
•
Enable
: enables/disables the auto standby function for the output.
•
Threshold
: standby activation threshold setting.
•
Time
: waiting time.
For an output to enter standby, the audio signal at the output must
remain below the specified threshold for the specified time
.
If any of the outputs have auto standby disabled, the Auto Sleep
function will not work properly
. Auto standby must be enabled on all 4
amplified outputs.
