Firmware V3.00
05.08.2019
13/100
2.5 Electrostatic-sensitive components and control components (ESD)
All electrostatic-sensitive components and control components (referred to as "ESD" below) are labelled with
the warning sign shown. Electrostatic charges arise from friction of insulating materials (e.g. floor covering,
items of clothing made of synthetic fibres etc.). Even small charges can result in damage to or destruction of
components. Such damage is not always immediately noticeable; in some cases, it does not lead to failure until
after a certain operating time.
2.5.1 ESD - Rules for handling and working
Transport and store ESDs only in the protective packaging provided.
Avoid materials
that may produce electrostatic discharge, for example
•
Plastic containers and table tops
•
Synthetic fibre clothing
•
Plastic-soled shoes
•
Plastic file covers
•
Styrofoam packaging
•
Computer monitors, etc.
Preferably wear the following:
•
Cotton work clothes
•
ESD shoes with conductive soles or leather soles
Use the following:
•
Conductive flooring
•
ESD workstations equipped with suitable tools (grounded soldering guns, antistatic wrist straps, etc.)
•
Conductive ESD bags, conductive plastic containers, IC tubes or cartons lined with conductive foam
•
Containers and worktops made of wood, metal or conductive plastics or paper bags
2.6 Abbreviations used
•
DGUV Regulation 3 - Accident Prevention Regulation for Electrical Systems and Equipment
(previously: BGV A3
- Employer’s Liability Association Regulation for Occupational Health and Safety)
• DIN
D
eutsches
I
nstitut für
N
ormung e.V. (German Standardisation Institute)
• ESD
E
lectrostatic-
S
ensitive
D
evice
• ESD
E
lectro-
s
tatic
d
ischarge (
E
lectro
S
ensitive
D
evices)
• IEC
I
nternational
E
lectric
C
ommittee
• VDE
V
erband
d
er
E
lektrotechnik
E
lektronik Informationstechnik e.V. (German Association for Electrical,
Electronic and Information Technologies)
ATTENTION
Risk of destruction of the control component / controller!
Electronic components
and control components (e.g. circuit boards) are sensitive to electrostatic
charges.
Therefore, the guidelines for handling electrostatic-sensitive components
and control components must be strictly observed.
Содержание UA 410 L AC
Страница 7: ...Firmware V3 00 05 08 2019 7 100 ...