Firmware V3.00
05.08.2019
80/100
8.3.3 Deactivating the input lock-down
Operation via system centre, store computer or operator terminal is only possible for controllers with CAN
bus connection; the removal of the lock-down is then applicable for all components in the CAN bus system.
The lock-down is automatically reactivated 15 minutes after the last button tap.
Before entering values, the input lock-down must be removed as follows:
8.3.3.1 System centres
Login to and logout (unlock and lock-down) of the system centre:
8.3.3.2 Store computer CI 3x00 / operator terminal AL 300
Before entering values, the input lock must be removed from the store computer or operator terminal as follows:
Step 1:
Select menu item 9 "Parametrisation" in the main menu.
Step 2:
Select menu item 3 "Lock-down" in this menu.
Step 3:
A. Unlocking store computer (standard)
Tap the ENTER button (
↵
) to set the marker (√). The lock-
down has now been deactivated and it is possible to make settings. or
B. Unlocking store computer and
activating Superuser mode (Superuser permissions)
Input current date backwards (nothing is shown on the
display). Example: The current date is April 17, 2016, i.e. 17/04/16; the required input for enabling Superuser
permissions is then 614071.
Confirm the input with the
ENTER
button (
↵
); an
"S"
is shown on the display.
Step 4:
Exit the operating screen and return to the main menu by tapping the
ESC
button twice.
The release of the lock-down must only be carried out by service personnel.
Tip:
If you are already in the user interface of a CAN bus node but have forgotten to release the input
lock-down, you can unlock the input lock-down for this controller using the button combination
MODE
and ,. The input lock-down is active again as soon as you exit the user interface of the controller.
Содержание UA 410 L AC
Страница 7: ...Firmware V3 00 05 08 2019 7 100 ...
