ECKELMANN UA 410 D, Руководство по эксплуатации

Страница: 46 / 142

Installation and Startup of UA 410 D
38 Firmware V1.40 - Doku 2.1 06. April 2016
5.3 Setting CAN bus address
CAN bus address (Nd.nnn = 1 to 99) are set by Decade Switches S1 and S2 . For all case controllers installed in
refrigerated cases, a unique CAN bus address must first be set at the two selector switches ( S1, S2 ) before
commissioning. The CAN bus address is set by the manufacturer on case controllers installed in the control
panel, but can subsequently be changed.
Danger of confusion! So as to avoid confusion, it is recommended to choose the Item ID of the dis­
play case as its CAN bus address. When both decade switches are at zero (giving address 00), the
CAN bus is inactive and the controller is
not recognized as a CAN bus station. A different CAN bus
address must be assigned to each refrigeration point and must be unique within the same system.
Decade switches S1 and S2 to set CAN bus address (Nd.nnn = 1 to 99)
S1: Tens of CAN bus address
S2: Units of CAN bus address
10 1 2 1 3 4
5
0
2
3
1
4 6
7
8
9
5
0
2
3
1
4 6
7
8
9
CA N -BUS
S1 S2
Z
N
G:
51203
53
7
30
DE
F
1
S
HI
ELD
G
N
D
CA
N
-LOW
CA
N
-
HI
G
H
S1 (tens) S2 (units) Set CAN bus
address
Function
0 0 00 CAN-Bus interface inactive (disabled)
0 1..9 01..09
Case controller: CAN bus address (Node No.) allocated
1..9 0..9 10..99
Settings made on Decade Switches S1 and S2 do not become effective on the case controller until
the controller is briefly switched off and back on!