Firmware V6.6.9
29.07.2020
83/147
1.
2.
3.
4.
5.
6.
7.
The remote control (terminal mode) screen looks like the following:
"Terminal Display" (4 lines of 20 characters) for display of the menu of the E*LDS component
(the arrow buttons must be used for paging; "swiping" cannot be done in this screen!).
A menu item, e.g. "Setpoints", is called up by pressing the "2" button on the "keyboard"
Name, position designation and CAN bus address of the E*LDS component
ESC button to go back one menu level in the E*LDS component or to exit entries without saving
Cursor buttons for navigation within the "Terminal Display" for left, right, up and down
MODE button, e.g. for toggling upper / lower case during text input (button is green if it has been pressed)
Alphanumeric keyboard for calling menus (e.. "2" calls up "Setpoints") or for input of setpoints etc.
ENTER button for confirmation of entries in the "Terminal Display"
9.1.3.1 Operation in terminal mode
Menus
A menu contains a selection list with maximum ten menu items. Other submenus or operating screens can be
provided after the selection of a menu item.
Selection of the menu items
Each line of this selection list in the display has a digit between 1 and 9 as well as 0 (for menu item 10) with the
associated name of the corresponding menu item. The various menu items can be selected directly by tapping
the numeric buttons 1 to 9 and 0. If a menu provides more than 3 submenus, the cursor buttons can be used
for paging in the menu to display the remaining menu items.
Operating screens
An operating screen contains values for output and/or values for input. More values for output and/or input can
Changes in terminal mode are effective immediately on the E*LDS component! Detailed descriptions
for the respective E*LDS component, its parameters and functions can be found in its operating
for a detailed description for operation in terminal
mode. Remote control can be exited again using the "Back" button.
A menu item does not have to be displayed to select it using a numeric button.
Содержание CI 4000
Страница 143: ...Firmware V6 6 9 29 07 2020 143 147 ...