ECKELMANN CI 4000 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 147

background image

Firmware V6.6.9

29.07.2020

12/147

3 System centre system design

CI 4000 series system centre with touchscreen.

3.1 Application

The system centres in the CI 4000 series are intended for installation in control panels. They are available in
various expansion stages and their range of functions is enabled using licence codes. The system centres
include the following models: CI 4000, CI 4100, CI 4400 and CI 4500; see chapter

Tasks and functions

details about the functions. The system centre is the centre of the E*LDS system and is used for central
parametrisation, configuration, display of operating data, messages and alarms of all E*LDS system
components. It can be operated using the touch screen and/or remotely using a host system computer and/or
service PC locally with the LDSWin PC software; for details see

Operation and access to the system centre

.

The data for all connected E*LDS system components are exchanged via the CAN bus. Alarms and messages
of E*LDS system components and the inclusion of external alarms from the installation and their retransmission
by LAN, modem or SMS can be realised.

The system centre is equipped with internal storage for data archiving of operating data and states, alarms and
messages, energy data or for logging of temperature and EU archives (HACCP). Optionally, up to maximum 4
extension modules (SIOX = Serial IO Extension) can be connected so that an additional 48 digital inputs and 32
relay outputs are available. Furthermore, the system centre has extensive wiring options and interfaces; see
chapter

Connections in the complete design

for details of these.

On account of its extended range of functions, the CI 4000 series is now designated as "system centre"; the
earlier "store computer" designation is dropped. The system centres in the CI 4000 series are compatible with
the CI 3000 and CI 3100 "store computers" and are intended as replacement device for these predecessor
models.

All explanations of the "System Centre CI 4000" named in this document also always describe all
models of the system centre in the CI 4000 series. Any differences in function or features between
these models are only explained where they have an effect. The main feature differences are
described in more detail in chapter

Expansion stages of the CI 4000 series

.



«
...
10
11
12
13
14
...
»

Содержание CI 4000




















































































































































Отзывы:

Нет отзывов

Похожие инструкции для CI 4000

Бренд: C&K systems Страницы: 2

Бренд: E-fly Страницы: 16

Бренд: Ransburg Страницы: 49

Бренд: Balboa Страницы: 2

Бренд: Badger Meter Страницы: 20

HomeTec Pro CFF3000

Бренд: Abus Страницы: 13

Бренд: NAVITAS Страницы: 7

Бренд: Abus Страницы: 2

Бренд: Znshine Solar Страницы: 16

Phase Matrix PXI-1420

Бренд: National Instruments Страницы: 38

Бренд: WAGO Страницы: 134

Бренд: GAC Страницы: 9

Бренд: ALLEN & HEATH Страницы: 15

Бренд: CP Electronics Страницы: 12

Бренд: Ultralife Страницы: 11

A Step AZ Series

Бренд: Oriental motor Страницы: 120

ID ISC.MU02.02-AD

Бренд: Feig Electronic Страницы: 96

Бренд: UMAX Technologies Страницы: 54

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды