ECKELMANN CI 4000, Руководство по эксплуатации

Страница: 25 / 147

Firmware V6.6.9 29.07.2020 25/147
•
•
•
Special input Function
Toggle setpoint Detects whether the setpoints should be toggled. Then a signal for the toggle setpoint is
transmitted via the CAN bus.
5.5 Relay outputs
The controller has 2 relay outputs (floating relay contacts). These can be used for various applications.
Alarm relays PRIO1 / PRIO2
Multi-function relay AUX
Relay outputs for week timers
(only with SIOX extension module)
For details, see chapter .Terminal assignment of the 230 V AC relay outputs v6.0 .
5.5.1 Alarm relays PRIO1 / PRIO2
The system controller has one relay output each (floating relay contacts) for the fixed alarm priorities X1 and X2
(terminal PRIO1: 35/36/38 - PRIO2: 25/26/28, see chapter
Terminal assignment of the 230 V AC relay outputs ).
In order to use these functions, E*LDS components must be used that also support these functions.
Details can be found in the operating manual of the respective E*LDS component.

Alarm signalling failure! In the event of the failure of a SIOX extension module with connected
external alarms, their monitoring also ceases. The failure of a SIOX extension module signals an
alarm. But then no further alarm is generated if any of the affected inputs changes to the alarm state.

It must be noted for GLT components in the 5000 family that configuration of a special input is in fact
possible, but this remains
without function !

Warning about dangerous electrical voltage! Danger of electric shock! BEFORE connecting and
disconnecting, it must be checked that no voltage is present at the 230 V AC relay outputs! Low
voltage and safety extra-low voltage must not be applied together at the relay outputs 15/16/18,
25/26/28 and 35/36/38.
