Ecco Xtatic HP6000, Руководство по эксплуатации и обслуживанию

Страница: 16 / 36

14
[Installing and removing the air wrap airless electrostatic spray nozzle]
When installing the air wrap airless electrostatic spray nozzle, engage it with the air cap with the notch on
the nozzle aligned with the locating pin on the air cap and firmly tighten it to the gun barrel with a retaining
nut.
When installing or removing the air wrap airless electrostatic spray nozzle, always firmly hold the gun barrel
by hand.
Installing or removing the nozzle while holding the grip, not the barrel, applies a
torsional force to the gun, possibly resulting in damage or paint leak.
If the nozzle is engaged without aligning the notch on it with the pin on the air
cap, the paint may spout out from the nozzle when the gun is triggered.
If the gun is used with the pin on the air cap broken or collapsed, the nozzle may
get out of position and disturb the spray pattern, possibly resulting in poor
coating.
If the locating pin on the air cap is broken or collapsed, the air cap cannot be
used any longer and must be replaced with a new one.
Check the packing condition on the mating face of the air wrap airless
electrostatic spray nozzle. If the packing is missing or damaged, the pressurized
paint intrudes into the air circuit, possibly resulting in poor coating or disorder.
WARNING
CAUTION
WARNING
CAUTION