Ecco Xtatic HP6000, Руководство по эксплуатации и обслуживанию

Страница: 12 / 36

10
[Connecting the controller and paint pump]
See the example of system construction on page 29.
Before starting operation, be sure to read thoroughly the Operation and Maintenance Manuals for controller
and paint pump.
①
Connecting to the connecting cable
Correctly connect the air wrap airless electrostatic spray gun to the attached connecting cable.
There is a possibility of injury or electric shock.
When installing the air wrap airless electrostatic spray gun, raise the trigger
lock of the gun to apply the lock.
②
Connecting to the grounding cable
Fasten the crimped round terminal at one end of the attached grounding cable to the grounding terminal
on the controller. The crimped terminal at the other end shall be grounded together with the product to
be coated, by connecting to a class A grounded booth or steel pillar using M6 screws and accessory
screws.
The paint pump shall be completely grounded by means of the accessory grounding wire in the same
manner.
Firmly connect a grounding wire to the controller. This operation requires a cross-ended screwdriver.
The control unit grounding wire shall be 3.5mm
2
or thicker and firmly connected
to a class A grounded object (with a grounding resistance not higher than 10
Ω)
so that it will not come off.
There is a possibility of fire or explosion.
Completely ground the gun and the product to be coated. The electrostatic
coating process uses the high-voltage electrostatic phenomenon and positively
generates static electricity. If not properly grounded, they may discharge static
electricity or generate sparks and fire or explosion may result.
3
Installation
WARNING
CAUTION
WARNING