19
②
Electrostatic spray nozzle
(1) Keep the electrostatic spray nozzle clean. When cleaning the nozzle, carefully wipe out using a bristle
brush or cloth soaked with a small amount of solvent.
There is a possibility of electric shock or injury.
When cleaning or replacing the nozzle, first turn off the power switch on the
controller and, five seconds after that, check that the indicator lamp has been
off. Bring the corona pin at the tip of the gun into contact according to a
grounding wire or any grounded metallic object for 10 seconds or longer,
reduce the paint pressure with the
pressure releasing procedure
(on page 3)
and remove the nozzle. Take care not to sting your finger with the corona pin.
Do not use a wire brush for cleaning. It damages the air wrap airless
electrostatic spray nozzle and affects the spray pattern or distribution.
(2) Keep the corona pin straight and remove the deposited paint if any.
If the corona pin is bent, straighten it.
(3) After cleaning, dry the nozzle.
The air cap and nozzle are made of a solvent-resistant resin but may be
degraded in performance if immersed into a certain solvent for a long time.
After cleaning them with a solvent, thoroughly dry them with blown air.
③
Paint hose and connecting cable
(1) Keep them clean and free from deposited paint and other contaminants. Remove the deposited paint if
any.
(2) Always take care not to damage them by a mechanical impact.
(For example, do not step or put an object on them or run over them by car.)
Never use a damaged hose.
Check the hose over its entire length for cuts, paint leakage, wear, blisters,
flaws and loose fittings.
If any of those problems is found, immediately withdraw the hose from service
and replace it with a new one.
(3) The paint hose and connecting cable are consumables. It is recommended to replace them with new
ones according to the degree of wear.
Please contact the responsible person at our company in the case of
replacing the connecting cable.
WARNING
CAUTION
WARNING
CAUTION
CAUTION
Содержание Xtatic HP6000
Страница 32: ...30 ECCO Xtatic HP6000 Exploded Diagram ...