Ecco Xtatic HP6000, Руководство по эксплуатации и обслуживанию

Страница: 27 / 36

25
(3) When assembling, engage the filter, temporarily lock the nut with the stay, rotate the pipe 37 (6004
0335 87) to eliminate the gap between the filter and the pipe, and tighten the retainer with care not to
install the stay in the opposite direction.
Then, secure the nut with the stay and install the paint hose.
Be sure to tighten the retainer at the filter before securing the nut with the stay.
If you do this in the opposite way, the retainer will be out of position, possibly
resulting in a paint leakage.
③
Replacement of paint needle, paint packing, air tappet and air packing
(1) Remove the hex. socket bolt 56 (6004 0330 29) and sleeve 31 (6004 0330 88) and remove the trigger
23 (6004 0335 85). This operation requires a Hex. 25mm hexagonal bar wrench.
(2) Remove the cap 22 (6004 0335 84) and remove three springs 19 (6004 0330 72), 20 (6004 0330 73)
and 21 (6004 0335 79). This operation requires a 10mm wrench.
Then, remove the paint seats according to
①
“Replacement of paint seats.”
Take care when installing the adapter, the threaded portion of which is made of
resin and likely to be inclined when installed.
CAUTION
CAUTION