Ecco Xtatic HP6000, Руководство по эксплуатации и обслуживанию

Страница: 17 / 36

15
There is a possibility of fire or explosion.

Check that the devices, equipment and floor in the coating workshop and the
parts of hangers that are in contact with the product to be coated are free from
deposited paint.
Especially, remove the paint completely from the parts of hangers in contact
with the product to be coated.

Do not bring any articles other than specified into the coating workshop.
Articles brought into the workshop must be grounded.

Be sure to check the power cord connector for insulation.

Do not smoke in the area where a spraying operation is performed.

A fire extinguisher with a sufficient capacity must be provided at the area where
a spraying operation is performed.

The paint thinner brought into the coating workshop must be the minimum and
stored in a metallic container closed with a lid.
There is a possibility of electric shock or injury.

The operators must wear cotton socks and conductive shoes and must not wear
gloves.
If you need to wear gloves, make a hole at the palm of each glove so that part of
your hand is kept in direct contact with the gun grip, or use conductive gloves.
If a trouble, inconvenience or other sign of failure is found, check within the
specified scope of maintenance according to the subsequent section
“Troubleshooting” (on page 21 and subsequent).
If the problem persists, stop checking and immediately contact us for proper and
complete repair.
Precautions Before Operation
4
WARNING
CAUTION