eCapture eyesmap, Руководство пользователя

Страница: 51 / 195

5 EyesMap Modules
User Manual 51
At this step, you must take three photographs which shall be used for the entire
process. In all photogrammetric captures, the following considerations should be taken
into account:

Take clear photos, try not to move while you are capturing. Avoid the sun facing
you. Capture the entire object to be measured, try to place said object in the
centre of the image.

Take different shots from the left to the right of the object, from the right to the
left, from the top to the bottom or from the bottom to the top. Try to have
displacement between the shots (never take two shots from the same position).

The overlapping area between the two images should be 80%. If this
overlapping can get to be almost 100%, it would be better for improved
orientation.

Not all objects are good for photogrammetry: for example, areas with a very
homogeneous texture like walls painted a single colour, plastic or glass objects
or water are not good for photogrammetry as the system has trouble finding
common points in the images due to reflection.

Whenever possible, we recommend taking photographs as perpendicularly to
the object as possible. This shall eliminate noise in the 3D model.
Even so, in certain cases with difficult textures, like glass or white walls, it is possible to
carry out point-to-point photogrammetry. In this case, you can use manual orientation
or automatic orientation with targets.
At minimum, 2 photographs should be taken. It is important to review each one of
them to delete those which are poorly-focused, poorly-lighted or blurry (accuracy can
go down notably).