eCapture eyesmap Скачать руководство пользователя страница 164

Страница: 164 / 195

7 Practical cases

User Manual

164

The desired area has been scanned, so the programme can now be closed.

The binary data which will be post-processed next has been automatically recorded
in the

“

3DDepth

”

directory of your project directory.

The directory where the data has been saved is

“

sequence_1724:

”

The contents of the directory for the real-time shots is as follows:

Do not delete or modify these files and directories, which have been
automatically generated. They contain binary data which the programme uses
for post-processing in order to improve the model generated in real time.

18. When you close the programme

“vSLAM

RGBD RealTime,” you return to the

“3D Depth Sensor” main menu and can now press “p

ost-process.

”

Содержание eyesmap




































































































































































































Результаты поиска

Содержание eyesmap

Отзывы:

eCapture eyesmap, Руководство пользователя, Страница: 164 / 195

Результаты поиска

Содержание eyesmap

Отзывы: