eCapture eyesmap Скачать руководство пользователя страница 194 | Manualshive

Страница: 194 / 195

eCapture eyesmap Скачать руководство пользователя страница 194

8 Orientation errors

User Manual

194

Error

Modules

Error. File doesn't exist.

Point-to-Point,

Orthophoto, 3D
Photomodelling

This error is produced if, during orientation processing, the user moves or deletes a file from
the project or calibration directory.

Error

Modules

Cannot determine internal calibration.

Point-to-Point,

Orthophoto, 3D
Photomodelling

It is possible that you do not have calibration loaded correctly for the cameras you are using.

Error

Modules

Error. Orientation failure. Please, check image

…

Point-to-Point,

Orthophoto, 3D
Photomodelling

This error indicates that orientation processing has failed. The fault could have arisen
between the image mentioned and its adjacent images. It is recommended you take the
photos with more overlap, be sure they are well-focused and

don’t stand

too far away.

Error

Modules

Error. Please, not enough images.

Point-to-Point,

Orthophoto, 3D
Photomodelling

This error can arise if files are manually moved (like the images which are being used) while
the process is being undertaken.

Error

Modules

Error. Please, not enough common points.

Point-to-Point,

Orthophoto, 3D
Photomodelling

This error indicates that there are not enough common points between adjacent images to
carry out the process. It is recommended you take the photos with more overlap, be sure they
are well-focused and

don’t stand

too far away.

Error

Modules

Error. Please, there isn't Metadata/Exif in the images.

Point-to-Point,

Orthophoto, 3D
Photomodelling

The processed images do not have metadata. Check that EyesMap has not loaded images
processed with an external application whose metadata could have been modified.

«
...
192
193
194
195
»

Содержание eyesmap




































































































































































































Отзывы:

Нет отзывов