22
7.2.2.8.
Operations -> Send
This function is analogical to the above one, at the same time it enables data saving
into EEPROM module. There is also possibility to set correct time into Active Track
device. Correct saving is confirmed with message on a screen.
7.2.2.9.
Operations -> Read
Function reads data saved in memory of GPRS module. Exchange of data follows on
port selected in section “Select Connection Type” (See below description of option
”Configuration”). Correct reading is confirmed with message on a screen. Data
downloaded from device may be saved on file (see chapter Operations -> Read) and
use for other devices.
To use this function it is necessary to define type and parameters of connection. E.g.
for local connection the following view is displayed:
where:
Connection kind - serial port to which module is connected
Access code- service code of transmitter
7.2.2.10.
Operations -> System events history
„Events history” provides information about last events stored in Active Track device
memory. See chapter Events history
7.2.2.11.
Operations -> Device monitor
“Device Monitor” provides real-time information on Active Track device state. See
chapter Device Monitor.
