19
7.2.2.2.
File -> Open
If file contains saved settings, they may be used to program next device. Firstly a
catalogue where file has been saved shall be chosen and then name of file shall be
provided. Obtained data collection may be modified by the user. Any amendments are
effective if send to device.
7.2.2.3.
File -> Save
During programming many devices in different configurations, it is not necessary to
have in mind each one as it may be saved on hard disc or other storage device under
any name and it may be loaded later on. This function save on disc any information
from configuration wizard window. After activation of function a dialog window
appears with request to provide file name. By default, the data are stored in a file
with .emi extension (Encrypted Memory Image). Configuration can also be saved to a
file with .cmi extension (Configuration Memory Image).
7.2.2.4.
File - > Language
Allows for selection of any available languages (determined in attached exterior
language files).
7.2.2.5.
File -> Connections
Before programming of devices, a connection type shall be defined. It is possible to
do it with two methods locally and remotely.
7.2.2.5.1.
Local connection
Local connection means that configuration software (namely computer on which is
installed) is directly connected to proper terminal of transmitter. Connection is
possible owing to special wire and through RS-232 serial port.
To program device or make any other operations (e.g. reading of device settings,
firmware amendments, etc.) it is necessary firstly to define connection parameters.
It is possible to do so with the above window that is available after activation of
connection from main menu and selection "Configuration" tab or after clicking on
icon on fast access bar and clicking on "RS232" tab.
Define:
Name of connection e.g. Locally
Choose the appropriate serial port e.g. COM 1
