44
9.
Operation rules
9.1.
RFID transponder read-out
If you wish to read ID-Tag, label or RFID card, press “Read-out” button and
within 15 seconds approach it with reading area. In case of no read-out, the device
returns to normal work mode after that time.
For more information about expecting time for transponder and confirmation of
correct read-out, go to
9.2.
Sending „Panic” command
In emergency, you may send “Panic” command to monitoring station by
pressing “Panic” button.
9.3.
Checking GSM range
You may check power of your GSM Provider signal at any time by pressing
“Checkpoint” until yellow LED light and then “Call” buttons and power of signal will be
displayed. For more information, go to Indicating work mode.
