27-11-2014 59 ebode IPV4NVR
OSD
You can configure the OSD (On screen Display) information of the NVR.
Step1: Choose ”
(Parameter Configuration) > Service Configuration > OSD”,The
OSD page is displayed.
Step2: You can configure the follow parameters.
Parameter
Description
Channel
You can select one channel from drop -down box list..
Display Mode
Display mode of system preview page of the NVR.
1*1080P: After this item is selected, an IPC device is di splayed
on the NVR preview interface and the resolution of up to 1080P
is supported for IPC devices.
4*960P: After this item is selected, four IPC devices are
displayed on the NVR preview interface and the resolution of
up to 960P is supported for IPC devices.
Note: If the Display Mode is changed successfully, the device will
automatically reboot.
Channel name
You can modify the IP Camera’s name. After you modify the name
and save the modification, the NVR system synchronizes the channel
name to the corresponding IPC device name. The channel name will
be shown on the top left of the video image.
Display
Channel Name
There are two options: Yes or No. Select Yes and you can see the IP
camera’s name on the video
Display Time
There are two options: Yes or NO. Select Yes and you can see the
system date on the channel video.
