27-11-2014 11 ebode IPV4NVR
Step4: When you log in for the first time, it will come to the operating of modify the
username and password automatically.
Step5: Click OK button when pop-up message box . Then enter the new username, new
password and confirm the password. Click OK button.
6.2 Setup Wizard
By default, the Setup Wizard starts once the NVR has loaded, as shown in Figure below.
The Setup Wizard can walk you through some important settings of the NVR. If you
don’t want to use the Setup Wizard at that moment, right click the mouse to quit.
Procedure
Step1: Select Language, If you don’t want to use the Setup Wizard at next time,
uncheck the Setup Wizard checkbox.
Note: You can also close the setup wizard by setting the Setup Wizard on “Menu >
Settings > General”.