27-11-2014 48 ebode IPV4NVR
The system can be configured to send an email to the designated users if an alarm or
motion event is detected etc. Before you configure the Email settings, the NVR must be
connected to a local area network (LAN) that maintains an SMTP mail server. The
network must also be connected to either an intranet or the Internet depending on the
location of the e-mail accounts to which you want to send notification.
Step1: Choose
” (Parameter Configuration) > Local settings > Email”. The Email
page is displayed.
Step2: Configure the Email parameter.
Parameter
Description
Enable E-Mail
Enable or Disable the Email function.
Authentication
Enable or Disable the server authentication feature.
SMTP Server
The SMTP Server IP address or host name.
SMTP Port
The SMTP port is usually set as 25. Some SMTP servers have their
own port, such as 587 or 465.
Transport Layer
Security
Transport Layer Security usually is None. If you use Gmail,
Transport Layer Security must be set to TLS or STARTTLS and
SMTP Port must be set to 465 or 25 or 587, which port you choose
should be decided by which Transport Layer Security you select.
SMTP Username
The user account of sender’s Email for SMTP server authenticat ion.
SMTP Password
The password of sender’s Email for SMTP server authentication.
Sender
The Email address of sender.
1
st
/2
nd
/3
rd
/4
th
Receiver
The Email address of user to be notified. you can set 4 receivers
