Eberg AORI E25-09, Инструкция по эксплуатации

Страница: 46 / 76

AORI EN
46 www.eberg.eu
• When the I FEEL function is activated, the air conditioner measures the ambient temperature around
the remote controller. Most often, the user keeps the remote control close to him, therefore the
temperature is more adapted to what the user feels, and not what is near the indoor unit of the air
conditioner.
Note!
Please put the remote controller near user and confirm the unit can receive the remote code. when this
function is set. Do not put the remote controller near the object of high temperature or low temperature in
order to avoid detecting inaccurate ambient temperature.
Introduction to the function of combination Buttons:
CHILD LOCK SETTING AND UNLOCKING
• This function prevents accidental changes to the air conditioner settings - wireless controller lock.
• In the state of turning on or turning off the machine, hold down the button and button at the
same time, enter the „Child lock” function to lock or unlock the remote control buttons, after locking,
the CHILD lock icon is displayed. At this time, by operating any button, the CHILD lock icon will blink
three times without sending signal to the unit.
• After unlocking the buttons, the CHILD lock icon is not dispayed. After powered on, the default is unlock.
TEMPERATURE SWITCH (°C/°F)
• In the state of turning off, holding down the „MODE” and „ „ button, switch between °C and °F.
LOW TEMPERATURE HEATING FUNCTION SETTING
• This function allows, in winter, to maintana constant temperature of +8 °C in the room in the heating
mode to prevent the room from cooling down completely. This is important in the winter.
• In heating mode, press the „MODE” and „ „ button at the same time will enter/exit the low temperature
heating function.
• „LA” icon is showed on the remote after entered into the low temperature heating function, fan speed
is default to Auto and non-adjustable.
• When switching from one mode to another mode, low temperature heating function is cancelled.
Turn off and then turn on air conditioner that will remain the low temperature heating function. After
powered on, the low temperature heating mode is defaulted off state.
• In the low temperature heating mode, “SLEEP” function and “Low temperature heating” function cannot
start at the same time.
FORCE DEFROSTING
• This function works when the device operates in low outdoor temperatures and there is a possibility of
frosting the aggregate.
• Possibility to start (force) the defrosting process by the user with the remote control. Pressing the
“Mode” and “Fan” buttons simultaneously will display the “dF” icon on the remote’s screen and activate
this function.
CLEAN AND MAINTENANCE
WARNING
• Turn off the air conditioner and disconnect the power before cleaning the air conditioner to avoid
electric shock.
• Do not wash the air conditioner with water to avoid electric shock.
• Do not use volatile liquid to clean the air conditioner.