Eberg AORI E25-09, Инструкция по эксплуатации

Страница: 43 / 76

AORI EN
43 www.eberg.eu
Operation guide
1. After connecting the power, press „ ” button on remote controller to turn on the air conditioner.
2. Press „MODE” button to select your required mode: Auto, Cool, Dry, Fan, Heat.
3. Press „ ” or „ ”, button to set your required temperature. (Temperature can’t be adjusted under auto
mode).
4. Press „FAN” button to set your required fan speed: auto , quiet , fan1, fan2 , fan3 , fan4 , fan5, turbo,
stepless speed.
5. Press „SWING” button to turn on or turn off the swing function.
Note!
• During operation, point the remote control signal sender at the receiving window on indoor unit.
• The distance between signal sender and receiving window should be no more than 8m, and there
should be no obstacles between them.
• Signal may be interfered easily in the room where there is fluorescent lamp or wireless telephone;
remote controller should be close to indoor unit during operation.
• Replace new batteries of the same model when replacement is required.
• When you don’t use remote controller for a long time, please take out the batteries.
• If the display on remote controller is fuzzy or there’s no display, please replace batteries.
After connecting the power, the air conditioner will make a sound. Power indicator is ON. After that, you can
operate the air conditioner by using remote controller.
In state of turning on, pressing the button on the remote controller, the air conditioner will make a„beep”
sound, which means the signal has been sent to the air conditioner. The display will show the corresponding
setting function icons.
ON/OFF button
Press this button to turn on or turn off the air conditioner.
MODE button
Press this button to select your required operation mode. You can select Auto, Cool, Dry, Fan and Heat mode.
• When selecting auto mode, air conditioner will operate automatically according to ex-factory setting.
Setting temperature can’t be adjusted and will not be displayed as well.
• Press „FAN” button can adjust fan speed. Press „SWING” button turn on or turn off the swing function.
• When selecting cool mode, air conditioner will operate under cooling mode. Press „ ” or „ ”, button
to adjust setting temperature. Press „FAN” button to adjust fan speed. Press „SWING” button to turn on
or turn off the swing function.
• When selecting dry mode, the air conditioner will operate in fan1, fan speed can’t be adjusted. Press
„SWING” button to turn on or turn off the swing function.
• When selecting fan mode, the air conditioner will only blow, no cooling and no heating. Press „FAN”
button to adjust fan speed. Press „SWING” button to turn on or turn off the swing function.
• When selecting heat mode, the air conditioner will operate in heating mode. Press „ „ or, „ ” button
to adjust setting temperature. Press „FAN” button to adjust fan speed. Press „SWING” button to turn on
or turn off the swing function.