Eberg AORI E25-09, Инструкция по эксплуатации

Страница: 45 / 76

AORI EN
45 www.eberg.eu
WIFI button
• Press this button to turn on or turn off WIFI function.
• Press this button more than 2s to enter WIFI configuration mode.
• For more details, please see for Smart APP user manual.
SLEEP button
• Press this button to turn on or turn off the SLEEP function under cool, heat and dry mode.
• Power on the machine, the default is sleep off; after setting sleep function, the sleep icon is displayed.
• Turn off the machine and switch modes to cancel the sleep function.
• It is no use under „FAN” mode and „AUTO” mode.
• When the sleep function is activated, the device increases the set temperature by 1 ° C per hour during
the first two hours of cooling mode (in heating mode, it lowers the temperature at the same rate). For
the next 5 hours, it keeps the reached temperature constant, after which the air conditioner turns off.
LIGHT button
• Press this button, switch between LIGHT On and LIGHT Off for indoor unit’s display.
• Power on the machine, the default is light on, and light icon displays.
• When the light is on, the display board displays enviroment temerature for 3 seconds and then dispaly
the setting temperature.
UP/DOWN Swing button
• Long press this button to suspend all swings, long press again the button to continue the previous
state.
• When working in any of the available configurations, holding the button for 2 seconds will stop this
function. Another longer (2s) pressing of the button will resume this function.
HEALTH/CLEAN button
• Press this button to turn on and turn off the HEALTH function.
• First power on the machine, HEALTH/CLEAN default is open, use remote control to turn on the machine
or switch modes, HEALTH/CLEAN function maintains the original state.
CLEAN FUNCTION
• It is unable to set CLEAN function when the unit is on. If the air conditioner run in cool or dry mode
before turning off, after turning off the air conditioner, long pressing this button to turn on CLEAN
function, the screen dispalys „CL”, by running for 10 mins in CLEAN function then turn off automatically,
or long pressing again this button to turn off CLEAN function,” CL” disappear.
• Power on the remote control, CLEAN funtion default is off.
• The CLEAN function cannot be set and displayed when the air conditioner is in AUTO, FAN and HEAT
mode before turning off the air condtioner.
• Self-cleaning function consists in starting the indoor fan for 10 minutes after turning off the air
conditioner (when the unit was operating in cooling or dry mode) and drying the internal parts of
the evaporator from moisture. This function blocks the growth of mold in humid environments and
prevents the formation of unpleasant odors.
I FEEL button
• Press this button, you can select the I FEEL function on and off. The first power on, I FEEL function
default is off. Press this button, I FEEL icon appear and I FEEL function is on, press this button again, close
the I FEEL function and I FEEL icon disppear.
• The temperature sensor built into the remote controller allows the air temperature to be read in the
immediate vicinity and transmits the information about the measured temperature to the indoor
unit. Based on this information, the limiter will start operating in the appropriate operating mode
for the indicated temperature. This function, due to the exact adjustment of the temperature to the
environment, increases the comfort of use and saves energy.