Eaton XNE-1SWIRE Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 62

background image

2 Product description

2.2 Function parameterization

16

XI/ON: XNE-1SWIRE

09/2011 MN05002016Z-EN

www.eaton.com

Bus-oriented
configuration check
(default setting)

If the physical structure of the SWIRE bus does

not

match the configuration stored

in the XNE-1SWIRE on power up (SW LED flashing), the physical structure is
compared continuously with the configuration stored in the XNE-1SWIRE. The
SWIRE bus starts operation as soon as the matching configurations are detected:
•

After the physical structure was stored in the XNE-1SWIRE:
• Automatically (if the automatic SWIRE configuration is activated)
• Or manually (if the automatic SWIRE configuration is deactivated),

by pressing the CFG button (only functions if the SW LED is flashing).

•

After the physical structure is corrected.

If the PLC configuration check is activated, data exchange is only started if the
configuration stored in the XNE-1SWIRE fully matches the SET configuration stored
in the PLC. If the two configurations do

not

match completely (RDY LED flashing),

the operation is aborted for the entire SWIRE bus (RDY LED flashing).

SWIRE communication is aborted for the entire SWIRE bus, if a bus modification or
slave failure is detected during operation. The physical structure is then compared
cyclically with the configuration stored in the XNE-1SWIRE.
•

The SWIRE bus starts operation as soon as the matching configurations are
detected:
• After the physical structure was stored in the XNE-1SWIRE:

• Automatically (if the automatic SWIRE configuration is activated)
• Or manually (if the automatic SWIRE configuration is deactivated),

by pressing the CFG button (only functions if the SW LED is flashing).

• After the physical structure is corrected.

•

According to the parameter settings, the data exchange is then started or the
operation is aborted:
• The data exchange is resumed immediately if the PLC configuration check is

deactivated.

• If the PLC configuration check is activated, data exchange is only restarted if

the configuration stored in the XNE-1SWIRE fully matches the SET configura-
tion stored in the PLC. The operation for the entire SWIRE bus is aborted if
they do

not

match completely.

Parameter setting:
•

PROFIBUS-DP and CANopen (Byte 1):
• MNA = 0 (MXpro: «configuration check» = bus oriented) and
• MC = 0 (MXpro: «Moeller compliant» = deactivate)

•

DeviceNet (Attribute 121 (79

hex

) «PARAM_COMMON_OERATION_MODES»):

• Bit 3 = 0 and
• Bit 4 = 0



This function is automatically deactivated if the «Moeller Conformance»
function is active.

«
...
14
15
16
17
18
...
»

Содержание XNE-1SWIRE































































Отзывы:

Нет отзывов

Похожие инструкции для XNE-1SWIRE

Бренд: easydriver Страницы: 26

Бренд: Calsense Страницы: 10

Бренд: National Instruments Страницы: 8

Бренд: Panamax Страницы: 16

Бренд: u-blox Страницы: 28

Бренд: TCS Страницы: 16

SUPERSTAR E-3000/F2

Бренд: praher Страницы: 10

Бренд: IDEC Страницы: 97

1020 CAN-RS232-RS422 MFL

Бренд: PENKO Страницы: 29

Бренд: WABCO Страницы: 3

Бренд: Jeckson Electric Страницы: 2

XDOM TAKE 6 IR/RF - PRODUCTSHEET

Бренд: Ebode Страницы: 88

GA Industries FIGURE 927

Бренд: Vag Страницы: 5

Бренд: C&K systems Страницы: 4

QS-TRAP-SHUFFLE-R1

Бренд: RF SOLUTIONS Страницы: 8

Бренд: Teradek Страницы: 10

Бренд: OneRemote Страницы: 3

Triton Barrier TL-2

Бренд: VALTIR Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды