4 Integration of the module in DeviceNet
4.1 SWIRE module class (VSC121)
XI/ON: XNE-1SWIRE
09/2011 MN05002016Z-EN
www.eaton.com
39
112
(70
hex
)
NUMBER OF SUPPORTED
OUTPUT CHANNELS
G
USINT
Shows the number of output channels supported by
this module instance.
113
(71
hex
)
INPUT1_DWORD
G
DWORD Contains the first 4 bytes of the process input data
(
Chapter 3.1.1 Process input, Page 25).
114
(72
hex
)
INPUT2_DWORD
G
DWORD Contains the last 4 bytes of the process input data
(
Chapter 3.1.1 Process input, Page 25).
115
(73
hex
)
OUTPUT1_DWORD
G
DWORD Contains the first 4 bytes of the process output data
(
Chapter 3.1.2 Process output, Page 27).
116
(74
hex
)
OUTPUT2_DWORD
G
DWORD Contains the last 4 bytes of the process output data
(
Chapter 3.1.2 Process output, Page 27).
117
(75
hex
)
DIAG_COMMON_ERROR
G
WORD
Each SWIRE slave is assigned a corresponding bit
from DIAG_COMMON_ERROR. Slave 1 belongs to
bit 0, slave 2 to bit 1 etc.
0: o.k.
1: One/several diagnostics messages present.
118
(76
hex
)
DIAG_CONFIG_ERROR
G
WORD
Each SWIRE slave is assigned a corresponding bit
from DIAG_CONFIG_ERROR. Slave 1 belongs to
bit 0, slave 2 to bit 1 etc.
0: The bus is in data exchange mode.
1: The configuration was not accepted, the bus
does not switch to data exchange mode (LED SW
flashes).
119
(77
hex
)
DIAG_COMMUNICATION_
ERROR
G
WORD
Each SWIRE slave is assigned a corresponding bit
from DIAG_COMMUNICATION_ERROR. Slave 1
belongs to bit 0, slave 2 to bit 1 etc.
0: o.k.
1: A communication error is present, such as a slave
is no longer reached, its internal timeout has
elapsed or communication is faulty. The master
cannot carry out data exchange with at least one
slave.
120
(78
hex
)
DIAG_PKZ_ERROR
G
WORD
Each SWIRE slave is assigned a corresponding bit
from DIAG_PKZ_ERROR. Slave 1 belongs to bit 0,
slave 2 to bit 1 etc.
0: No PKZ has tripped or diagnostics function has
been deactivated via the parameter setting.
1: At least one PKZ has tripped.
Attr.No.
dec.
(hex.)
Attribute name
Access
Type
Description
